keyboard_arrow_left Back to the overview

Install LineageOS on
NVIDIA Jetson TX2 [Android TV]

quill

Basic requirements

  1. Read through the instructions at least once before actually following them, so as to avoid any problems due to any missed steps!
  2. Make sure your computer has adb and fastboot. Setup instructions can be found here.
  3. Enable USB debugging on your device.
  4. Make sure that your model is actually listed in the “Supported models” section here (exact match required!)
  5. Boot your device with the stock OS at least once and check every functionality.
  6. LineageOS is provided as-is with no warranty. While we attempt to verify everything works you are installing this at your own risk!

Preparing for installation

Tegra devices come with a unique boot mode called “Tegra ReCovery Mode” or RCM, also known as APX. Tegraflash is the official NVIDIA tool for interfacing with RCM mode on recent Tegra devices. Tegraflash is only available for Linux. It will also not run properly in a VM.

Installing a custom recovery using Tegraflash

  1. Download a flash package.

    • It will be named p2771_flash_package.tar.xz.
  2. Install xz and python3. To do so, run sudo apt -y install xz-utils python3 (Debian based hosts) or dnf -y install xz-utils python3 (Redhat based hosts).
  3. Run the following command in the folder which you downloaded the flash package to:

    • Run tar -xvf p2771_flash_package.tar.xz.
  4. Power off the device, and boot it into download mode:
    • With the device off, press the FRC REC button, then tap POWER. Release FRC REC once apx enumerates.
  5. Now, from the same terminal as before, run:
    sudo ./flash.sh
    
  6. The script will flash the boot stack and boot directly to recovery.

Installing LineageOS from recovery

  1. Build a LineageOS installation package.
    • (Optionally): If you want to install an application package add-on such as Google Apps (use the arm64 architecture), please read and follow the instructions on Google Apps page
  2. If you are not in recovery, reboot into recovery:
    • The bootloader does not allow using hardware buttons to boot to recovery. After apx flash, the device will boot directly to recovery. After installing Lineage, normal methods can be used to reboot to recovery.
  3. Now tap Factory Reset, then Format data / factory reset and continue with the formatting process. This will remove encryption and delete all files stored in the internal storage, as well as format your cache partition (if you have one).
  4. Return to the main menu.
  5. Sideload the LineageOS .zip package but do not reboot before you read/followed the rest of the instructions!
    • On the device, select “Apply Update”, then “Apply from ADB” to begin sideload.
    • On the host machine, sideload the package using: adb sideload filename.zip.

Installing Add-Ons

  1. Even though you are already in recovery, click Advanced, then Reboot to Recovery
  2. When your device reboots, click Apply Update, then Apply from ADB, then adb sideload filename.zip for all desired packages in sequence.

All set!

Once you have installed everything successfully, you can now reboot your device into the OS for the first time!

  • Click the back arrow in the top left of the screen, then “Reboot system now”.

Get assistance

After you’ve double checked that you followed the steps precisely, didn’t skip any and still have questions or got stuck, feel free to ask on our subreddit or in #LineageOS on Libera.Chat.