Info about kenzo

Get LineageOS for the Xiaomi Redmi Note 3

Installation

How to install LineageOS on the Xiaomi Redmi Note 3

Build guide

How to build LineageOS for the Xiaomi Redmi Note 3

Special boot modes

  • Recovery: With the device powered off, hold Volume Up + Power. Keep holding both buttons until the “MI” logo appears on the screen, then release.

  • Download: With the device powered off, hold Volume Down + Power. Keep holding both buttons until the word “FASTBOOT” appears on the screen, then release.

Find help online

You can find assistance with LineageOS on our subreddit, or in #LineageOS on freenode.

Xiaomi Redmi Note 3 (kenzo)
Released February 2016
Specifications
SoC Qualcomm MSM8956 Snapdragon 650
RAM 2/3 GB
CPU Hexa-core Cortex-A53 & Cortex-A72
4 x 1.4 GHz & 2 x 1.8 GHz
Architecture arm64
GPU Adreno 510
Network
  • 2G bands: 850 900 1800 1900 MHz GSM
  • 3G bands: 850 900 1700(AWS) 1900 2100 MHz HSDPA, 850 900 1900 2100 MHz HSDPA (India)
  • 4G bands: 1(2100) 2(1900) 3(1800) 4(1700/2100) 5(850) 7(2600) 8(900) 38(2600) 39(1900) 40(2300) 41(2500), 1(2100) 3(1800) 5(850) 7(2600) 8(900) 38(2600) 39(1900) 40(2300) 41(2500) (India)
Storage 16/32 GB
SD card up to 256 GB (hybrid SIM slot)
Screen 1080x1920 (403 PPI)
Bluetooth 4.1 with A2DP
Wi-Fi 802.11 a/b/g/n/ac
Peripherals
  • Fingerprint reader
  • Accelerometer
  • Gyroscope
  • Proximity sensor
  • Compass
  • GPS
  • Infrared sensor
  • FM radio
Cameras 2
  • 16 MP, LED (dual-tone) flash
  • 5 MP, No flash
Dimensions 150 mm (5.91 in) (h)
76 mm (2.99 in) (w)
8.7 mm (0.34 in) (d)
Battery Non-removable Li-Po 4050 mAh